Table of Contents
Advertisement
Safety Overview
Safety Overview
Safety warnings appear throughout this publication in procedures that may harm you if performed
incorrectly. A warning symbol precedes each warning statement.
IMPORTANT SAFETY INSTRUCTIONS
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this
device. Statement 1071
SAVE THESE INSTRUCTIONS
Parts List
The following items are included in your SFS 7008 package:
•
•
•
•
•
•
•
Required Tools, Equipment, and Personnel
In addition to the accessories provided with the switch, you should have the following:
•
•
•
•
Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note
2
Chassis with TopSpin OS v2.5.0 preloaded
2
Serial Cable Kits
Serial Cable
–
Serial cable document
–
DB-9 connector male to RJ-45
–
DB-9 connector female to RJ-45
–
MX-9-1 roll-over cable
–
Power cord for each power supply
Bezel
Parts bag
Regulation and Compliance Statement
1 year warranty package (Cisco PN 83-1190-01)
A #2 Phillips screw driver
Screws (not provided) to attach the mounting brackets to the rack
Any associated mounting clips to secure the brackets to your rack (two for each rail of the rack)
A rack with enough clearance for the Cisco SFS 7008P switch and cables.
78-17434-01 Rev. A0
Advertisement
Table of Contents
