Table of Contents
Advertisement
Equipment required for taper mounting the RESA30 'A' section ring
Required parts:
•
Appropriate RESA 'A' section ring (see
•
Appropriate number of screws for ring size (see
NOTE: Recommended screw type M3 × 0.5 and must comply with ISO 4762/DIN 912 grade 10.9 minimum /ANSI B18.3.1M with a CTE of 10 to 16 µm/m/°C @ 20 °C.
•
Dial Test Indicator (DTI)
•
Appropriate cleaning solvents (see
'Storage and handling'
•
Hex key
•
Torque wrench
Optional parts:
•
Renishaw scale wipes (A-9523-4040)
•
Lint-free cloth
Original instructions
'RESA30 'A' section ring dimensions'
on page 27)
'RESA30 'A' section ring dimensions'
on page 19)
on page 27)
www.renishaw.com
31
Advertisement
Table of Contents
