Table of Contents
Advertisement
10.2 Not included / required tools
Item
Description
6 mm torque wrench
To tighten the extrusion mounting screws
3 mm torque wrench
To tighten the readhead mounting screws
1.5 mm hex key
Air bung removal (only if air purge is required)
3 mm hex key
For locking the mounting aid
M8 screws
2 × M8 × 1.25 screws length ≥ 20 mm for mounting the extrusion
M4 screws
2 × M4 × 0.7 screws length ≥ 20 mm for mounting the readhead
Loctite 243
All fastenings (except air bung and cable connection) should be secured with Loctite 243
If an air bung requires replacement or repositioning it should be secured with Loctite 222.
Loctite 222
The cable connector should also be secured with Loctite 222.
www.renishaw.com
17
Advertisement
Table of Contents
