Equipment for flange mounting the REXA30 ring
Required parts:
•
Appropriate REXA ring (see
'REXA30 ring dimensions'
•
Appropriate number of screws for ring size (see
NOTE: Recommended screw type M5 × 0.8 and must comply with ISO 4762 / DIN 912 grade 10.9
minimum / ANSI B18.3.1M with a CTE of 10 to 16 µm/m/°C @ 20 °C.
•
Dial Test Indicator (DTI)
•
Rubber mallet
•
Appropriate cleaning solvents (see
'Storage and handling'
•
Hex key
•
Torque wrench
Optional parts:
•
Renishaw scale wipes (A-9523-4040)
•
Lint-free cloth
Original instructions
on page 40)
'REXA30 ring dimensions'
on page 40)
on page 19)
www.renishaw.com
41