Table of Contents
Advertisement
Equipment for interference fit mounting the RESA30 'A' section and RESA30 'B' section rings
Required parts:
•
Appropriate RESA 'A' or 'B' section ring (see
•
Appropriate number of screws for ring size (see
NOTE: Recommended screw type M3 × 0.5 and must comply with ISO 4762/DIN 912 grade 10.9 minimum/ANSI B18.3.1M with a CTE of 10 to 16 µm/m/°C @ 20 °C.
•
Appropriate cleaning solvents (see
'Storage and handling'
•
Hex key
•
Torque wrench
Optional parts:
•
Renishaw scale wipes (A-9523-4040)
•
Lint-free cloth
36
RESOLUTE™ Functional Safety Installation guide and safety manual Siemens DRIVE-CLiQ encoder system
'RESA30 'A' section ring dimensions'
on page
'RESA30 'A' section ring dimensions'
on page
on page 19)
27
or
'RESA30 'B' section ring dimensions'
27
or
'RESA30 'B' section ring dimensions'
on page 29)
on page 29)
Original instructions
Advertisement
Table of Contents
