Table of Contents
Advertisement
Equipment required for installing the RTLC20-S scale
Required parts:
•
Appropriate length of RTLC20-S scale (see
•
Side mount scale applicator (A-9589-0115) or top mount scale applicator (A-9589-0094)
•
Datum clamp (A-9585-0028)
•
Loctite
435
(P-AD03-0012)
®
™
•
Appropriate cleaning solvents (see
'Storage and handling'
•
2 × M2.5 screws
•
Green shim (supplied with TONiC readhead)
•
Lint-free cloth
Optional parts:
•
Renishaw scale wipes (A-9523-4040)
•
End cover kit (A-9585-0035)
1
•
Reference mark selector magnet
(A-9653-0143)
•
Q limit magnet (A-9653-0139)
•
P limit magnet (A-9653-0138)
•
Magnet applicator tool (A-9653-0201)
•
Loctite 435 dispensing tip (P-TL50-0209)
•
Guillotine (A-9589-0071) or shears (A-9589-0133) for cutting RTLC20-S to length required
1
The reference mark selector magnet is only required for 'Customer selectable reference mark' readheads.
Original instructions
'RTLC20-S scale installation drawing'
on page 26)
on page 20)
www.renishaw.com
27
Advertisement
Table of Contents
