Not Included / Required Tools - Renishaw FORTiS-S FS Installation Manual

8.2 Not included / required tools

12 FORTiS-S enclosed encoder system with multiple readheads
Item Description
5 mm torque wrench
To tighten the extrusion and the readhead mounting screws
1.5 mm hex key Air bung removal (only if air purge is required)
For locking the mounting aid
4 mm hex key
For use with the M5 extrusion and M5 readhead screw options
5 mm hex key For securing of the readhead
2 × M6 × 1.0 screws length ≥ 35 mm for mounting the readhead
M6 screws
M6 × 1.0 screws length ≥ 20 mm for mounting the extrusion to the machine bed