Table of Contents
Advertisement
RESA30 'A' section ring installation drawing
Dimensions and tolerances in mm
N holes equally spaced on PCD ØDH Ø3.5 through c/bore Ø6 x 3 deep
N holes equally spaced on PCD ØDH M3 x 0.5 through c/bore Ø3.5 x 4 deep
ØDI
ØDH
ØDO
1
The dimensions DO, DI and DH for the RESA30 'A' section rings are listed on the following page.
26
RESOLUTE™ Functional Safety Installation guide and safety manual Siemens DRIVE-CLiQ encoder system
Ring rotation to give
A
increasing count
A
θ
1
1
1
Section A-A
10
0.5 x 45°
3
NOTES:
•
The scale zero position is radially aligned with the centre of the mounting hole to the left of
the 'Renishaw' logo.
θ
•
is the angle between one tapped hole and the adjacent clearance hole.
The angle between two clearance holes is 2
15° ± 0.2°
1 x 45°
θ
.
Original instructions
Advertisement
Table of Contents
