Serial Port Module Replacement; Remove A Serial Port Module - Lenovo ThinkSystem SR635 V3 User Manual

Serial port module replacement

Use this information to remove and install a serial port module.

Remove a serial port module

Use this information to remove a serial port module.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
DrpxDWLMfgtXO4O6BVYTim
Procedure
Step 1. Remove the top cover. See
Step 2. Disconnect the cable of the serial port module from the system board.
Step 3. Press the two latches on both ends at the same time, and carefully lift the riser cage out of the
chassis by two latches.
and "Safety inspection checklist" on page 46
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Remove the top cover" on page 212.
.
Chapter 5 Hardware replacement procedures
to ensure that you
187