Setting Network Configuration - Ihse Draco MultiView 4K60 MV42 Series User Manual
Hide thumbs
Also See for Draco MultiView 4K60 MV42 Series:
- User manual (108 pages) ,
- Quick setup (2 pages)
Table of Contents
Advertisement
Draco MultiView 4K60
7.2.2
Setting Network Configuration
To initialize system-relevant configuration changes on the Draco MV, the Draco MV must be restarted. The restart
of the Draco MV might take several minutes, and the Draco MV is not available during the restart.
If the syslog function is activated, the logging will be started after restarting the Draco MV.
The parameters for the network configuration are set in this menu.
Fig. 57
OSD Menu Configuration - Network
NOTICE
NOTICE
Configuration via OSD
75
Advertisement
Table of Contents
