Ihse Draco MultiView 4K60 MV42 Series User Manual page 111

Draco MultiView 4K60
Activating SNMP Traps
To activate active reporting of the SNMP traps, proceed as follows:
1. Click System Settings in the toolbar to display the tasks of the system settings.
2. Click Network in the task area to display the Network subtasks.
3. Click the SNMP subtask to display the SNMP working area.
The SNMP Agent function must be activated to activate the SNMP traps.
4. Tick the Enable Traps checkbox within the SNMP Trap area.
5. Enter the IP address of the SNMP server under SNMP Server.
6. Tick the checkboxes of the desired traps to activate them.
7. Click Apply to confirm the changes.
SNMP presets and settings for an SNMPv3 User can be configured using the management software. For more
information, please refer to the Draco tera user manual.
Configuration via Web UI
111