Setting Network Configuration - Ihse MV42 Series User Manual

Draco MultiView 4K
60
6.2.2

Setting Network Configuration

To initialize system-relevant configuration changes on the Draco MV, the Draco MV must be restarted.
The restart of the Draco MV may take several minutes, and the Draco MV is not available during the
restart.
If the syslog function is activated, the logging will be started after restarting the Draco MV.
The parameters for the network configuration are set in this menu.
OSD Menu Configuration - Network
Fig. 52
The following parameters can be configured:
Network Interface
Field
DHCP
IP Address
Entry Description
Y The network settings are automatically supplied by a DHCP
server.
Note: If DHCP is activated and there is no physical network
connection available, the boot times might increase.
N Function not active (default).
Byte Enter the IP address if DHCP is not active (default:
192.168.100.95).
NOTICE
NOTICE
Configuration via OSD
73