Draco MultiView 4K60
Configuration via Web UI
To configure the settings for a video input, proceed as follows:
1. Click System Settings in the toolbar to display the tasks of the system settings.
2. Click Outputs in the task area to display the Outputs overview.
3. Click
in the line of the video output to be configured.
The working area of the Outputs menu is displayed.
Fig. 106
Web UI form System Settings - Outputs - Working area
4. Change the custom name under Custom Name if desired.
5. Select the resolution for the selected output in the Resolution list if required.
6. Click Apply to confirm the changes.
123