Setting Network Configuration; Fig. 55 Osd Menu Configuration - Network - Ihse Draco tera enterprise 480 Series User Manual

Configuration via OSD
6.3.5

Setting Network Configuration

To initialize system-relevant configuration changes, the matrix must be restarted. Restarting the matrix
may take several minutes, and the matrix is not available during the restart.
Consult your system administrator before changing the network parameters. Otherwise, unexpected
results and failures can occur in combination with the network.
If the syslog function is activated, the logging will be started after restarting the matrix or controller card.
The parameters for the network configuration are set in this menu.
OSD Menu Configuration - Network
Fig. 55
82
NOTICE
NOTICE
NOTICE
Draco tera enterprise