Ihse Draco MultiView 4K60 MV42 Series User Manual page 136

Configuration of USB 2.0 Ports via Configuration File
Entering or Changing a Parameter in the Configuration File
To enter or change a parameter of the Draco MV, proceed as follows:
1. Connect the Draco MV to any source using a Mini-USB cable.
The Draco MV opens a flash drive containing the
2. Open the Config.txt
#CFG
3. Ensure that is written in the first line of the file.
4. Add a line break directly behind
5. Add the desired parameter in capitals in the line below
6. Save the Config.txt
7. Manually power off the Draco MV.
8. Power on the Draco MV.
The Draco MV starts automatically with the respective setting for the USB 2.0 ports.
Fig. 120 Example - Config.txt with parameter to activate the routing of USB ports 1 and 4
136
file in a text editor.
#CFG
.
file.
Config.txt
file.
#CFG
.
Draco MultiView 4K60