Maintenance
4. If you got instructions from the manufacturer's technical support to update the HUSWITCH firmware:
HUSWITCH.pfw
4.1. Copy the
4.2. Wait until the copying process is complete.
5. Afterwards update the other
5.1. Copy additional firmware files one by one and paste it to the Draco MV flash drive.
5.2. After copying each firmware file, wait until the copying process is complete.
6. Manually power off the Draco MV after copying all required firmware files.
7. Remove the Mini-USB cable from the Draco MV.
8. Power on the Draco MV.
The Draco MV starts automatically with the new firmware.
A restart is not sufficient, a cold start is mandatory.
212
firmware file and paste it to the Draco MV flash drive.
.pfw
files changed if required, regarding the following steps:
Draco MultiView 4K60