Operation via Mouse
Mouse Movement with Vertical Monitor Arrangement (Example in Quad Mode)
In a dual-head system with the desktop arrangement main monitor left (video 1) and the second monitor at left
(video 2), the window sequence when moving the mouse is as follows:
Video 1
Video 2
1.1
↕
1.2
↕
3.1
↕
3.2
Fig. 122
Mouse movement with vertical monitor arrangement
Activating the restricted Automatic Mode
MSC with automatic mode and restricted automatic mode uses absolute mouse coordinates. Accordingly, settings
in the operating system are not considered.
When restricting the automatic mode of MSC, the mouse is restricted to the windows associated to the input with the
current USB HID control and cannot be moved over the edge of a window. The Hot Mouse function cannot be used.
To restrict the automatic mode of enabled MSC, proceed as follows:
Enter Hot Key, x, m, Enter.
Mouse movements can be used within the windows associated to the input with the current USB HID control.
To enable the mouse to cross the edge of a window with enabled manual mode, press Left Shift while moving the
mouse.
Deactivating the restricted Automatic Mode
To enable the automatic mode with activated MSC, proceed as follows:
Enter Hot Key, x, a, Enter.
Mouse movements can be used within all windows of all associated input.
Keyboard commands are fixed to the position of the keys on the keyboard. Keyboard mapping tables may vary for
country-specific layouts
If using, e.g., a French keyboard layout (AZERTY) Hot Key, x, q, Enter must be pressed instead.
138
1.1 ↔ 2.1
3.1 ↔ 4.1
1.2 ↔ 2.2
3.2 ↔ 4.2
2.1
↕
2.2
↕
4.1
↕
4.2
Draco MultiView 4K60