Operation via OSD
4. To focus inputs of the secondary board:
4.1. Enter Y in the Secondary field.
4.2. Enter N in the Primary field.
4.3. Select the input in the OUT 1.1 list under Source Selection that has to be routed to the main output. This
input will be focused.
4.4. Select the input in the OUT 2.1 list under Source Selection that has to be routed to the second output.
5. Apply the selected inputs depending on the current display mode:
5.1. With current Fullscreen Mode, press Enter.
5.2. With another display mode than the Fullscreen Mode press F1 or click Fullscreen in the Display Mode list.
The window associated to the selected input 1 is maximized on the first monitor connected to the secondary
board and the window associated to the selected input 2 is maximized on the second monitor connected to
the secondary board. The OSD is closed, and the keyboard LEDs returned to their previous status.
OSD Menu Switch (example with dual-head device and asynchronous switching)
Fig. 147
162
Draco MultiView 4K60