Draco MultiView 4K60
7.5.8
Resetting a changed Window in a Custom Layout
To reset a window in a layout, proceed as follows:
Possibility 1
Move the OSD mouse into the customized window and press Backspace.
The cropped area is reset, and the video signal is displayed in full screen in the customized window.
Fig. 75
Edit mode in Custom Mode - Example after resetting a cropped area back to full screen
Resetting via Backspace resets always the window in which the OSD mouse is located.
Possibility 2
Click the left and right mouse buttons simultaneously inside the window.
The window is reset to its last saved state, or if it has not been changed, to the factory settings with the current
resolution.
Edit mode in Custom Mode - Example after resetting a cropped area back to factory settings
Fig. 76
Possibility 3
Open another layout without saving the unsaved changes of the current layout (see chapter 7.5.9, page 95).
Configuration via OSD
95