Draco MultiView 4K
60
5.2.2
Setting Network Configuration
To activate the modified network parameters a restart of the Draco MV has to be performed.
If the syslog function is activated, the logging will be started after restarting the Draco MV.
The parameters for the network configuration are set in this menu.
Fig. 32
OSD Menu Configuration - Network
The following parameters can be configured:
Network Interface
Field
DHCP
IP Address
Entry
Description
Y
The network settings are automatically supplied by a DNS
server
Note: If DHCP is activated and there is no physical network
connection available, the boot times might increase.
N
Function not active (default)
Byte
Input of the IP address, if DHCP is not active (default:
192.168.100.95)
NOTICE
NOTICE
Configuration via OSD
45