Configuration; Command Mode - Ihse L484-8VHSWR User Manual

5

Configuration

Pos: 18 /806-IHSE/Konfiguration/Kommando-Modus/476-xx @ 5\mod_1278947076886_6.doc @ 43540 @ 2 @ 1
5.1

Command Mode

The CPU Switch has a Command Mode that allows several functions via
keyboard command during normal use.
To enter Command Mode use a 'Hot Key' sequence and to exit Command
Mode, press <Esc>. While in Command Mode, the LEDs Shift and Scroll
on the console keyboard will flash.
In Command Mode normal keyboard and mouse operation will cease.
Only selected keyboard commands are available.
If no keyboard command is executed within 10 s after activating
Command Mode, it will be automatically deactivated.
The following table lists the keyboard commands to enter and to exit
Command Mode and to change the 'Hot Key' sequence:
Function
Enter Command Mode
(default)
Exit Command Mode
Change 'Hot Key' sequence
<Key> + <Key>
<Key>, <Key>
2x <Key>
2017-03-31
Press keys simultaneously
Press keys successively
Press key quickly, twice in a row
(similar to a mouse double-click)
Configuration
Keyboard Command
2x <Left Shift> (or 'Hot Key')
<Esc>
<current 'Hot Key'>, <c>,
<new 'Hot Key' code>, <Enter>
Until 2011-30-09:
<Left Ctrl> + <Left Shift> + <c>,
<'Hot Key' Code>, <Enter>
17