Maintenance
7. Click Save Device Status to save the device status locally or click Skip if the status has been already saved.
Fig. 198
Web UI dialog Maintenance - Firmware Update - Save Status
8. The progress of the update is displayed in the working area.
After a successful update, a query to restart the device appears, if required.
9. Click Yes to restart the device.
The current configuration is saved in the permanent memory of the Draco MV and the Draco MV will be
restarted. Restarting the device might take several minutes, and the device is not available during the restart.
Fig. 199
Web UI dialog Maintenance - Firmware Update - Restart
194
Draco MultiView 4K60