Ihse Draco MultiView 4K60 MV42 Series User Manual page 110

Configuration via Web UI
Fig. 89 Web UI menu System Settings - Network - SNMP (Working area 2)
SNMP Trap
Traps
Enable Traps
SNMP Server
Port
Select All
Status
Switch Command
Output Inserted
Output Removed
Video Input Changed
EDID Change
Power Supply 1
Power Supply 2
110
Description for activated traps
Sends trap messages from the SNMP agent to the SNMP server.
IP address of the SNMP server in the form "192.168.1.1".
SNMP port (default: 162).
Selection of all traps.
Notification about the Draco MV status.
Notification about a performed switching operation at the Draco MV.
• Notification about a console newly connected to the Draco MV.
• Notification about a switched-on console.
• Notification about a console removed from the Draco MV.
• Notification about a switched-off console.
Notification about a change of resolution or change of frequency.
Notification about a change in EDID information at the inputs.
Notification about the status of power supply unit #1.
Notification about the status of power supply unit #2.
Draco MultiView 4K60