Draco MultiView 4K60
5.3.7.2
Device View Section
Colored ports with/without connection (video input and output, network, and power supply voltage, see examples
•
in chapter 5.3.7.4, page 60)
•
Colored source ports, showing the current USB HID control
•
Colored LEDs, showing the current input focus
•
Colored numbers above the ports, showing the visibility of the signals on the assigned outputs
•
Tooltips for interfaces, displayed when moving the mouse over:
−
Source designations
−
Video inputs and outputs with labelled port designations, Custom Name, and status
(connected/disconnected)
Power supply voltage with name and status
−
Network port (Host Name, Subnet Mask, Gateway, Mac Address, Status (connected/disconnected), API
−
Service (enabled/disabled))
Port Colors
The following table shows the ports with/without connection:
Port color
5.3.7.3
Video, Window and Monitor Information Section
Video Input: Window -> assigned input with Custom Name -> without signal or with resolution of the signal
Video Output: Output with Custom Name -> resolution of the connected monitor
Monitor Information: Output with Custom Name -> assigned EDID.
Description
No source is connected, or the connected source is switched off.
A source is connected, and the source is switched on.
No monitor is connected, or the connected monitor is switched off.
A monitor is connected, and the monitor is switched on.
No network connection available.
A network connection is available.
No power supply voltage available.
A power supply voltage is available.
Access Options
59