Ihse Draco MultiView 4K60 MV42 Series User Manual page 130

Configuration via Web UI
With activated User Management option (see chapter 8.2.1, page 102), the following parameters can be configured
individually for each user profile. Note: Without enabled User Management option, ticking these parameter options
will have no effect.
Parameter
Audio Mixing
MSC*
Hot Mouse*
Web UI menu User Settings - General Settings (Working area 3)
Fig. 115
130
Entry/Status Description
Activated Merges incoming audio streams into a single stereo stream.
Depending on the device type, up to 8 audio streams (7.1) can be merged
into a 2-channel stereo stream.
Deactivated Function not active (default).
Activated Enables the Multi-Screen Control function.
Absolute mouse coordinates are used for the MSC automatic mode
with/without restriction (see chapter 10, page 137).
Moving the mouse pointer over the edge of one window into another
window switches the USB HID control seamlessly to the associated input.
For dual-head installations, MSC is recommended to be only activated if
using the Hot Mouse function in Preview Mode, PiP Mode, True PiP
Mode, and Custom Mode. The behavior of the mouse movement in dual-
head systems has to be noticed (see chapter 10, page 137).
Deactivated Function not active (default), relative mouse coordinates are used.
If Hot Mouse is enabled, it will be disabled if disabling MSC.
Activated Enables the Hot Mouse function for inputs of the primary board (MSC
function is required and will also be enabled).
The Hot Mouse function is necessary to focus on another input with
current display modes Preview Mode, PiP Mode, True PiP Mode, and
Custom Mode.
Moving the mouse pointer over the edge of one window into another
window, turns the Hot Mouse Mode on. A transparent overlay, and an
overlay mouse pointer (OSD mouse) appear. The OSD mouse can be
used to focus on another input by clicking in the associated window.
The behavior of the mouse movement in dual-head systems has to be
noticed (see chapter 10.1, page 137).
Deactivated Function not active (default).
Draco MultiView 4K60