Ihse Draco MultiView 4K60 MV42 Series User Manual page 74

Configuration via OSD
Field
Async Switch*
Display Mode 1*
Input Focus 1*
Display Mode 2*
Input Focus 2*
* Can be overwritten if the User Management option in this menu is activated.
Global OSD Settings
Field
OSD Timeout [sec]
Horizontal Mouse
Speed*
Vertical Mouse
Speed*
Double Click Time
[ms]*
Keyboard Layout*
Hot Key*
Fast Key*
* Can be overwritten if the User Management option in this menu is activated.
To set parameters for the system configuration, proceed as follows:
1. Select Configuration > System in the main menu.
2. Change the desired settings.
3. Click Okay to confirm the changes.
74
Entry Description
Activated Allows different output of the input signals separately to the primary and
secondary board. E.g., if the inputs of the secondary board are to be used
for video viewing only.
Allows different display modes of the primary and secondary board.
Note: USB HID control switching is managed by the primary board.
Depending on the output management, the mouse could not be visible in
windows assigned to inputs of the secondary board.
Deactivated Focusing on inputs with USB HID control is synchronized for both boards.
List Starts the Draco MV after a switch-on or a restart by default with the
selected display mode for the primary board.
List Starts the Draco MV after a switch-on or a restart by default with the
selected input focus for the primary board.
List Dual head devices only:
Starts the Draco MV after a switch-on or a restart with the selected default
display mode for the secondary board.
List Dual head devices only:
Starts the Draco MV after a switch-on or a restart by default with the
selected display mode for the secondary board.
Entry Description
0 to 999 Specify the time of inactivity after which the OSD will be closed
automatically (0 = deactivated).
At 0 seconds, the OSD is not automatically closed.
1 to 9 Adjust the horizontal mouse speed with 1 = fast, 9 = slow (default: 4).
1 to 9 Adjust the vertical mouse speed with 1 = fast, 9 = slow (default: 5).
100 to 800 Adjust the time slot for a double-click (default: 200).
Region Set the OSD keyboard layout according to the keyboard used (default:
German (DE)).
Keyboard Start the command mode via keyboard sequence.
command
Keyboard Open the OSD directly (default: 00).
command
How often the shortcut key has to be pressed depends on the specified
key: 1x for function keys or print key, 2x for all other keys.
Draco MultiView 4K60