Ihse Draco MultiView 4K60 MV42 Series User Manual page 103

Draco MultiView 4K60
Field
User Management
Load Default
LAN Echo
Lock Monitor EDID
Extender
Compatibility Mode
Audio Mixing*
MSC*
Entry/Status Description
Activated Activates the possibility to set individual user configuration in the menu
User Settings - General Settings. Individual user parametrization can
overwrite some options set in this global menu.
Note: When activating this option, the Web UI is closed, and a re-login is
required.
Deactivated Starts the Draco MV after a switch-on or a restart by default with the
display mode and input focus for the primary and secondary board
selected in this menu.
Activated Starts the Draco MV after a restart or a switch-on with the configuration
stored as Default.
Deactivated Starts the Draco MV after a restart or a switch-on with the last saved
configuration (default).
Activated Sends all switching commands performed in the Draco MV as an echo via
LAN connection.
Note: This function should be enabled when using a media controller via
LAN connection.
Deactivated Function not active (default).
Activated Locks the current monitor EDID in the configuration.
After switching on, restarting, or reconnecting during operation, the locked
EDID will be used from the source instead of the native EDID of a future
connected monitor.
Deactivated After switching on, restarting, or reconnecting during operation, the video
signal is displayed with the resolution of the preset default EDID (see
chapter 8.3.1, page 119).
Activated Enables extender compatibility mode.
Note: Online changes require a restart.
Deactivated Function not active (default).
Activated Merges incoming audio streams into a single stereo stream.
Depending on the device type, up to 8 audio streams (7.1) can be merged
into a 2-channel stereo stream.
Deactivated Function not active (default).
Activated Enables the Multi-Screen Control function.
Absolute mouse coordinates are used for the MSC automatic mode
with/without restriction (see chapter 10, page 137).
Moving the mouse pointer over the edge of one window into another
window switches the USB HID control seamlessly to the associated input.
For dual-head installations, MSC is recommended to be only activated if
using the Hot Mouse function in Preview Mode, PiP Mode, True PiP, and
Custom Mode. The behavior of the mouse movement in dual-head
systems has to be noticed (see chapter 10, page 137).
Deactivated Function not active (default), relative mouse coordinates are used.
If disabling MSC, the Hot Mouse function will also be disabled, because
MSC is required for the Hot Mouse function.
Configuration via Web UI
103