Configuration via OSD
7.3.5
Setting Network Configuration
To initialize system-relevant configuration changes, the matrix must be restarted. Restarting the matrix
can take several minutes and the matrix is not available during the restart.
Consult your system administrator before modifying the network parameters. Otherwise, unexpected
results and failures can occur in combination with the network.
The Syslog function starts logging after the matrix or controller card is restarted if the Syslog function has
been activated in this menu.
The parameters for the network configuration are set in this menu.
Fig. 67
OSD Menu Configuration - Network
76
NOTICE
NOTICE
NOTICE
Draco tera flex