Ihse Draco MultiView 4K60 MV42 Series User Manual page 114

Configuration via Web UI
Configuring the Real Time Clock without Time Server
Depending on getting the local time of your computer or setting another time, the process and the messages
differ.
To set the real time clock without using SNTP, proceed as follows:
1. Click System Settings in the toolbar to display the tasks of the system settings.
2. Click Date & Time in the task area to display the Date & Time working area.
3. Setting another time than the local time:
3.1. Set the current date in the Date and Time section.
3.2. Set the current time in the Date and Time section.
3.3. Click Apply to confirm the settings.
A query to save and re-login appears
3.4. Click Yes to save the changes.
Fig. 94 Web UI dialog System Settings - Date & Time - Save changes
A message appears showing the saving process, the page will be reloaded, and the Login page is displayed.
4. Setting the local time:
4.1. Click Get Local Time, to receive the time from the currently used computer.
4.2. Click Apply to confirm the settings.
A query to save and re-login appears
4.3. Click Yes to save the changes.
Web UI dialog System Settings - Date & Time - Save changes
Fig. 95
A message appears showing the saving process, the page will be reloaded, and the Login page is displayed.
114
Draco MultiView 4K60