Ihse Draco MultiView 4K60 MV42 Series User Manual page 131

Draco MultiView 4K60
With activated User Management option (see chapter 8.2.1, page 102), the following parameters can be configured
individually for each user profile. Note: Without enabled User Management option, ticking these parameter options
will have no effect.
Parameter
Async Switch
Display Mode 1
Input Focus 1
Default Display Mode
Input Focus 2
Entry/Status Description
Activated Allows different output of the input signals separately to the primary and
secondary board. E.g., if the inputs of the secondary board are to be used
for video viewing only.
Allows different display modes of the primary and secondary board.
Note: USB HID control switching is managed by the primary board.
Depending on the output management, the mouse could not be visible in
windows assigned to inputs of the secondary board.
Deactivated Focusing on inputs with USB HID control is synchronized for both boards.
List Starts the Draco MV after a switch-on or a restart by default with the
selected display mode for the primary board.
List Starts the Draco MV after a switch-on or a restart by default with the
selected input focus for the primary board.
List Starts the Draco MV after a switch-on or a restart with the selected default
display mode for the secondary board.
List Starts the Draco MV after a switch-on or a restart by default with the
selected display mode for the secondary board.
Configuration via Web UI
131