Draco MultiView 4K60
Field
Syslog #1/#2
To set parameters for the network configuration, proceed as follows:
1. Select Configuration > Network in the main menu.
2. Change the desired settings.
3. Click Okay to confirm the changes.
Entry
Description
DEB
Activate debug messages in Syslog (default: N)
Note: The debug messages are exclusively for Draco MV diagnostics.
Use this function only for concrete debug cases as it is not intended for
normal operation.
INF
Activate information messages in Syslog (default: N).
NOT
Activate notification messages in Syslog (default: Y).
WAR
Activate warning messages in Syslog (default: Y).
ERR
Activate error messages in Syslog (default: Y).
Configuration via OSD
77