Ihse Draco MultiView 4K60 MV42 Series User Manual page 128

Configuration via Web UI
The following functions are available by clicking on the respective button:
Button
* Extended user functions are always available to be configured by an administrator, but enabling of functions
depends on activated User Management.
The following functions are available by adding a user or editing general settings:
Fig. 113 Web UI menu User Settings - General Settings (Working area 1)
Administrator
The administrator (username: admin) has the permission to configure the system. Access and configuration rights,
see table on page 127. The following base parameters can be configured for the administrator:
Field
Full Name
Password
SNMPv3 User
The SNMPv3 user (username: snmp) has the permission to enable encrypted SNMPv3. Access and configuration
rights, see table on page 127. The following base parameters can be configured for the SNMPv3 user:
Field
Full Name
Password
SNMPv3 User
128
Function
Add User
Edit general settings*
Edit display options*
Edit OSD*
Edit custom layout*
Delete user
Entry Description
Text Optional: personal username (case sensitive, up to 32 characters)
Text User password (case sensitive, input of minimum 8 characters up to
16 characters, including one uppercase, one lowercase, one digit and one
special symbol).
Entry/Status Description
Text Optional: personal username (case sensitive, up to 32 characters).
Text User password (case sensitive, input of minimum 8 characters up to
16 characters, including one uppercase, one lowercase, one digit and one
special symbol).
Activated Permission to use SNMPv3 (encrypted).
Deactivated SNMP is enabled (default), SNMPv3 is not enabled.
Draco MultiView 4K60