Ihse Draco MultiView 4K60 MV42 Series User Manual page 145

Draco MultiView 4K60
Example for Focusing on another Input in Custom Mode
In Custom Mode, the window with the video signal of the focused input will be displayed in the foreground. The
USB HID control is switched to the associated source of the focused input and the mouse can be used in the
associated window.
For instance, in the initial situation in Custom Mode, the active window shows the video signal from input 1 and the
USB HID control is switched to input 1.
To switch to another input with a function key, proceed as follows:
1. Enter the Hot Key to start the command mode (see chapter 5.1, page 49).
2. Press the number of the specific input to be switched (e.g., 3) and press Enter.
The video signal of the focused input is streamed in the window displayed in the foreground.
Fig. 134 Custom Mode - Example after focusing on another input
Example for Focusing on another Input in True PiP Mode
In True PiP Mode, the video signal of the focused input will be displayed on the main monitor/main window. The
USB HID control is switched to the associated source of the focused input and the mouse can be used in the
associated window.
For instance, in the initial situation in True PiP Mode, the active window shows the video signal from input 1 and the
USB HID control is switched to input 1.
To switch to another input with a function key, proceed as follows:
1. Enter the Hot Key to start the command mode (see chapter 5.1, page 49).
2. Press the number of the specific input to be focused (e.g., 2) and press Enter.
The video signal of the focused input is streamed in the main window and the small windows change in numeric
order.
True PiP Mode - Example after focusing on another input
Fig. 135
Operation via Keyboard
145