Draco MultiView 4K60
Web UI menu System Settings - Network - General (Working area 2)
Fig. 86
Network Services
Field
API Service
SSL/TLS Support
Maintenance Service
To set parameters for the network configuration, proceed as follows:
1. Click System Settings in the toolbar to display the tasks of the system settings.
2. Click Network to display the General menu and the network subtasks.
The working area of the selected task or subtask is displayed.
3. Change the desired settings.
4. Click Apply to confirm the changes.
Status
Description
Activated
Activates the LAN interface at the Draco MV for access via Web UI (API
service port 7055/7056) (default).
Deactivated
Function not active.
Activated
Activates SSL/TLS encryption for API, Web UI API, Web UI and
Draco MV communication.
Deactivated
Function not active (default).
Activated
Enables the maintenance service for advanced diagnostic.
Deactivated
Function not active (default).
Configuration via Web UI
107