Ihse Draco MultiView 4K60 MV42 Series User Manual page 104

Configuration via Web UI
Field
Hot Mouse*
* Can be overwritten if the User Management option in this menu is activated.
Web UI menu System Settings - System (Working area 3)
Fig. 84
Field
Async Switch*
Display Mode 1*
Input Focus 1*
Display Mode*
Input Focus 2*
* Can be overwritten if the User Management option in this menu is activated.
104
Entry/Status Description
Activated Enables the Hot Mouse function for inputs of the primary board (MSC
function is required and will also be enabled).
The Hot Mouse function is necessary to focus on another input with
current display modes Preview Mode, PiP Mode, True PiP Mode, and
Custom Mode.
Moving the mouse pointer over the edge of one window into another
window, turns the Hot Mouse Mode on. A transparent overlay, and an
overlay mouse pointer (OSD mouse) appear. The OSD mouse can be
used to focus on another input by clicking in the associated window.
The behavior of the mouse movement in dual-head systems has to be
noticed (see chapter 10.1, page 137).
Deactivated Function not active (default).
Entry/Status Description
Activated Allows different output of the input signals separately to the primary and
secondary board. E.g., if the inputs of the secondary board are to be used
for video viewing only.
Allows different display modes of the primary and secondary board.
Note: USB HID control switching is managed by the primary board.
Depending on the output management, the mouse could not be visible in
windows assigned to inputs of the secondary board.
Deactivated Focusing on inputs with USB HID control is synchronized for both boards.
List Starts the Draco MV after a switch-on or a restart by default with the
selected display mode for the primary board.
List Starts the Draco MV after a switch-on or a restart by default with the
selected input focus for the primary board.
List Dual head devices only: Starts the Draco MV after a switch-on or a restart
with the selected default display mode for the secondary board.
List Dual head devices only: Starts the Draco MV after a switch-on or a restart
by default with the selected display mode for the secondary board.
Draco MultiView 4K60