Ihse Draco MultiView 4K60 MV42 Series User Manual page 148

Operation via Keyboard
Example 1
For instance, in the initial situation in Preview Mode, the active window shows the video signal from input 1 and the
USB HID control is switched to input 3.
To switch to the Quad Mode with a function key, e.g., to USB input 2, proceed as follows:
1. Enter the Hot Key to start the command mode (see chapter 5.1, page 49).
2. Press the corresponding function key F2.
The window arrangement is changed to the Quad Mode by retaining the USB HID control on the current input.
The command mode is closed, and the keyboard LEDs returned to their previous status.
Fig. 137 Example - Changing the display mode from the Preview Mode to the Quad Mode
Example 2
In the initial situation in Preview Mode, the main window shows the video signal from input 1 and the USB HID control
is switched to input 3.
For instance, to switch to the Custom Mode with a function key, proceed as follows:
1. Enter the Hot Key to start the command mode (see chapter 5.1, page 49).
2. Press one of the corresponding function keys F9...F12 to select one of the Custom Mode layouts.
The window arrangement is changed to the Custom Mode by retaining the USB HID control on the current input.
The associated window of the input with USB HID control is displayed in the foreground.
The command mode is closed, and the keyboard LEDs returned to their previous status.
Fig. 138 Example - Changing the display mode from the Preview Mode to the Custom Mode
148
Draco MultiView 4K60