GENERAL SAFETY CONSIDERATIONS
Before operating your robot, and while performing the Risk Assessment, consider the following:
•
Do not operate the robot or any associated machinery in any manner not considered in the
Risk Assessment.
•
Establish and set up the appropriate safety settings in the robot's and other equipment's
software.
•
Provide system passwords only to personnel who are sufficiently trained and responsible in
operation of the robot
•
Never override any safety functions or equipment.
•
Provide instructions for use of the entire system.
•
Do not operate the robot or system without the necessary safety equipment as identified by
the Risk Assessment.
•
Assure a clean, uncluttered and organized Workplace.
•
Provide appropriate signage.
•
Provide appropriate Personal Safety Equipment.
•
Assemble a single file containing this manual, the Risk Assessment, and all associated
technicial information.
•
Assure that the robot arm and all associated equipment are securely fastened in place.
•
Locate the emergency stop switch, and the robot control tablet, outside the robot's reach and
in a location which may be accessed without entering the robot's operating area.
•
Do not operate the robot or any associated machinery if it is damaged.
•
Be certain that all settings are correctly configured
•
Do not modify the robot. If modified, the robot's performance can not be assured and may
become dangerous in ways not predictable during the Risk Assessment.
•
Never climb on the robot.
•
Do not use the robot in explosive environments.
•
Do not use the robot in medical or human life critical applications.
•
Do not use the robot without performing a Risk Assessment.
•
Do not power on or use the robot in applications in which the specifications or performance of
the robot is inadequate for the job.
OB7 Collaborative Robot User Manual
Preface / 8
Version 0.6