productive robotics OB7 User Manual page 58

LEARN
OB7 learns by using "control tiles". Each control tile (or more simply called, "tile") is named with the
type of operation that OB7 will perform.
There is a separate control tile for each operation that OB7 understands, and they are all located in
the column on the left side of the screen.
The column of tiles in the middle of the screen are all the operations that OB7 has learned for this job.
In the picture shown here, only the "Start" operation has been learned so far. All jobs begin with a
"Start" tile. The start
The right half of the screen contains the details for each tile in the job. As OB7 learns, it automatically
fills in these details. Some details of an operation will be entered directly in this area by you. For
example: you might enter the number of times you wish OB7 to repeat the job.
Control
Tiles
Available
For Use
OB7 Collaborative Robot User Manual
Meet OB7 / 58
tile specifies the general information about the job.
Help Jog
Access Job
Preview Control Control Tiles
Learn Screen
Version 0.6
Job Name
"Learned"
for this job
Done