Exporting Diagnostics Data From Ob7 - productive robotics OB7 User Manual

EXPORTING DIAGNOSTICS DATA FROM OB7

1. Insert a USB flash drive into the robot controller computer.
2.
Enter Help by tapping the question mark at the top left of the screen.
3.
Enter Diagnostics by tapping the 'Diagnostics' selection from the list on the left of the screen.
4. Tap the button labeled 'Save Diagnostic Data' near the bottom of the screen.
5.
A message indicating that saving is in progress should appear to the right of the button. Once
diagnostic data has been saved, a message reading 'Save complete' will appear to the right of
the button. The USB flash drive may now be removed.
6.
Insert the USB flash drive into your computer. Diagnostic data is stored in the file named 'pr.
logs'.
7. Email the file named: pr.logs to
OB7 Collaborative Robot User Manual
Instructional Documents / 118
service@productiverobotics.com
Version 0.6