Assembling The Ob7 Assembly Table - productive robotics OB7 User Manual

Step 3:
Remove the stand from the crate. Clip the ties holding the stand down to the crate base.
Remove the wood spacers from under the sides of the stand and remove the wood strip from the
edge of the crate. Then, roll the stand off the crate.
Clip tie down straps.
Remove wood strip.

ASSEMBLING THE OB7 ASSEMBLY TABLE

If you have purchased the OB7 assembly table, follow these steps to assemble and install it on the
OB7 Stand.
The OB7 assembly table attaches to the top of the stand column with 4 M8 screws. Use two people to
install the assembly table on the column.
Use two people to install the OB7
assembly table.
OB7 Collaborative Robot User Manual
Getting Started With OB7 / 16
Remove screws from spacers (both
sides).
Roll stand off of crate.
Using 4 M8 screws, attach the OB7
assembly table to the top of the
stand column.
Version 0.6
Remove spacers.
OB7 Assembly Table Installed on
Stand