Jumbo Frame; Figure 4.38 L2 Switching > Jumbo Frame - Advantech EKI-7428 Series User Manual

Item
Member Ports
Add
The ensuing table for MLD Static Groups Status settings are informational only:
VLAN ID, Group IP Address, Member Ports and Modify.
Multicast Groups
To access this page, click L2 Switching > Multicast > MLD Snooping > Multicast
Groups.
The ensuing table for Multicast Groups settings are informational only: ID, Group IP
Address, Member Ports, Type and Life (Sec).
Router Ports
To access this page, click L2 Switching > Multicast > MLD Snooping > Router
Ports.
The ensuing table for Router Ports settings are informational only: VLAN ID, Port
and Expiry Time (Sec).
4.5.9

Jumbo Frame

Jumbo frames are frames larger than the standard Ethernet frame size of 1518
bytes. The Jumbo Frame function allows the configuration of Ethernet frame size.
To access this page, click L2 Switching > Jumbo Frame.
The following table describes the items in the previous figure.
Item
Jumbo Frame
(Bytes)
Apply
The ensuing table for Jumbo Frame Config settings are informational only: Jumbo
Frame (Bytes).
Description
Enter the ports designated with the static group.
Click Add to add a MLD static group.
Figure 4.38 L2 Switching > Jumbo Frame
Description
Enter the variable in bytes (1518 to 9216) to define the jumbo frame
size.
Click Apply to save the values and update the screen.
57 EKI-7428 Series User Manual