Link Aggregation; Lldp Statistics; Figure 4.6 Monitoring > Port Monitoring > Port Utilization; Figure 4.7 Monitoring > Lldp Statistics - Advantech EKI-7428 Series User Manual

4.3.3.2 Port Utilization
To access this page, click Monitoring > Port Monitoring > Port Utilization.
Figure 4.6 Monitoring > Port Monitoring > Port Utilization
The following table describes the items in the previous figure.
Item
Refresh period
IFG
4.3.4

Link Aggregation

The Link Aggregation function provides LAG information for each trunk. It displays
membership status, link state and membership type for each port.
To access this page, click Monitoring > Link Aggregation.
The ensuing table for Link Aggregation Group Status settings are informational
only: LAG, Name, Type, Link State, Active Member and Standby Member.
The ensuing table for LACP Information settings are informational only: LAG, Port,
PartnerSysId, PnKey, AtKey, Sel, Mux, Receiv, PrdTx, AtState and PnState.
4.3.5

LLDP Statistics

The LLDP Statistics page displays the LLDP statistics.
To access this page, click Monitoring > LLDP Statistics.
The following table describes the items in the previous figure.
Item
Clear
Refresh
The ensuing table for LLDP Global Statistics settings are informational only:
Insertions, Deletions, Drops and Age Outs.
Description
Click the drop-down menu to select and designate a period (second
intervals) to refresh the information (TX and RX) listings.
Click the drop-down menu to enable or disable the Interframe Gap
(IFG) statistic.
Figure 4.7 Monitoring > LLDP Statistics
Description
Click Clear to reset LLDP Statistics of all the interfaces.
Click Refresh to update the data on the screen with the present state
of the data in the switch.
33 EKI-7428 Series User Manual