Figure 4.45 L2 Switching > Spanning Tree > Mst Instance Priority Settings - Advantech EKI-7428 Series User Manual

The following table describes the items in the previous figure.
Item
MSTI ID
VID List
Move
The ensuing table for MST Instance ID Information settings are informational only:
MSTI ID and VID List.
4.5.10.7 MST Instance Priority Settings
The MST Instance Priority Settings allows you to specify the MST instance and the
bridge priority in that instance.
To access this page, click L2 Switching > Spanning Tree > MST Instance Priority
Settings.
Figure 4.45 L2 Switching > Spanning Tree > MST Instance Priority Settings
The following table describes the items in the previous figure.
Item
MSTI ID
Priority
Apply
The ensuing table for MST Instance Priority Information settings are informational
only: MSTI ID, Priority and Action.
4.5.10.8 MST Instance Info
To access this page, click L2 Switching > Spanning Tree > MST Instance Info.
The ensuing table for STP Bridge Status settings are informational only: Bridge
Identifier, Designated Root Bridge, Root Path Cost, Designated Bridge, Root Port
and TCNLast Topology Change.
The ensuing table for STP Port Status settings are informational only: Port, Identifier
(Priority / Port Id), Path Cost Conf/Oper, Designated Root Bridge, Root Path Cost,
Designated Bridge, Edge Port Conf/Oper, P2P MAC Conf/Oper, Port Role and Port
State.
4.5.10.9 STP Statistics
To access this page, click L2 Switching > Spanning Tree > STP Statistics.
The ensuing table for STP Statistics settings are informational only: Port,
Configuration BPDUs Received, TCN BPDUs Received, Configuration BPDUs
Transmitted and TCN BPDUs Transmitted.
EKI-7428 Series User Manual
Description
Enter the MST instance ID (0-15).
Enter the pre-configured VID list.
Click Move to save the values and update the screen.
Description
Click the drop-down menu to specify the MST instance.
Click the drop-down menu set the bridge priority in the specified MST
instance
Click Apply to save the values and update the screen.
62