Table of Contents
Advertisement
Item
System Location
System Contact
MAC Address
IP Address
Subnet Mask
Gateway
Loader Version
Loader Date
Firmware Version
Firmware Date
System Object ID
System Up Time
4.3.2
Logging Message
The Logging Message Filter page allows you to enable the display of logging
message filter.
To access this page, click Monitoring > Logging Message.
The following table describes the items in the previous figure.
Item
Target
Severity
Description
Click Default to enter the location: up to 256 alphanumeric characters
(default is Default).
Click Default to enter the contact person: up to 128 alphanumeric
characters (default is Default).
Displays the MAC address of the switch.
Displays the assigned IP address of the switch.
Displays the assigned subnet mask of the switch.
Displays the assigned gateway of the switch.
Displays the current loader version of the switch.
Displays the current loader build date of the switch.
Displays the current firmware version of the switch.
Displays the current firmware build date of the switch.
Displays the base object ID of the switch.
Displays the time since the last switch reboot.
Figure 4.4 Monitoring > Logging Message
Description
Click the drop-down menu to select a target to store the log
messages.
Buffered: Store log messages in RAM. All log messages are
cleared after system reboot.
File: Store log messages in a file.
The setting allows you to designate a severity level for the Logging
Message Filter function.
Click the drop-down menu to select the severity level target setting.
The level options are:
emerg: Indicates system is unusable. It is the highest level of
severity.
alert: Indicates action must be taken immediately.
crit: Indicates critical conditions.
error: Indicates error conditions.
warning: Indicates warning conditions.
notice: Indicates normal but significant conditions.
info: Indicates informational messages.
debug: Indicates debug-level messages.
31
EKI-7428 Series User Manual
Advertisement
Table of Contents
