L2 Switching; Port Configuration; Figure 4.15 L2 Switching > Port Configuration - Advantech EKI-7428 Series User Manual

4.5

L2 Switching

4.5.1

Port Configuration

Port Configuration describes how to use the user interface to configure LAN ports on
the switch.
To access this page, click L2 Switching > Port Configuration.
The following table describes the items in the previous figure.
Item
Port
Enabled
Speed
Duplex
Flow Control
Fiber Port
Enabled
Speed
Duplex
Flow Control
Apply
The ensuing table for Port Status settings are informational only: Port, Edit (click to
enter description), Enable State, Link Status, Speed, Duplex, FlowCtrl Config and
FlowCtrl Status.
EKI-7428 Series User Manual
Figure 4.15 L2 Switching > Port Configuration
Description
Click the drop-down menu to select the port for the L2 Switch setting.
Click the radio-button to enable or disable the Port Setting function.
Click the drop-down menu to select the port speed: Auto, Auto-10M,
Auto-100M, Auto-1000M, Auto-10/100M, 10M, 100M, or 1000M.
Click the drop-down menu to select the duplex setting: Auto, Half or
Full.
Click the radio button to enable or disable the flow control function.
Click the drop-down menu to select the port for the L2 Switch Fiber
port setting.
Click the radio-button to enable or disable the Fiber Port Setting
function.
Click the drop-down menu to select the fiber port speed: Auto, Auto-
1000M, 100M, or 1000M.
Click the drop-down menu to select the duplex setting: Half or Full.
Click the radio button to enable or disable the flow control function.
Click Apply to save the values and update the screen.
40