Figure 4.112 Management > Dhcp Server > Global Settings - Advantech EKI-7428 Series User Manual

The following table describes the items in the previous figure.
Item
DHCP Server
Apply
Restart
The ensuing table for Status Information settings are informational only: DHCP
Server Service.
4.9.5.2 Global Settings
The Global Settings page allows you to configure the global settings for the DHCP
function.
To access this page, click Management > DHCP Server > Global Settings.
Figure 4.112 Management > DHCP Server > Global Settings
The following table describes the items in the previous figure.
Item
Lease Time
Low IP Address
High IP Address
Subnet Mask
Gateway
DNS
Apply
The ensuing table for Global Information settings are informational only: Lease
Time, Low IP Address, High IP Address, Subnet Mask, Gateway, DNS and Clear
(click to clear IP pool).
EKI-7428 Series User Manual
Description
Select Enable or Disable to designate the DHCP server function
type.
When a new DHCP server mode is selected, the switch requires a
system restart for the new mode to take effect.
Click Apply to save the values and update the screen.
Click Restart to have the switch perform a system restart function. In
the event that the IP settings are changed, the DHCP server must be
restarted for the IP settings to take effect.
Description
Type in the value designating the lease time (60 - 864000) in seconds
for each setting lease.
Type in the value designating the lowest range in the IP address pool.
Type in the value designating the highest range in the IP address
pool.
Type in the value designating the subnet mask for the IP address
pool.
Type in the value designating the gateway for the IP address pool.
Type in the value designating the DNS for the IP address pool.
Click Apply to save the values and update the screen.
104