Figure 4.135 Tools > Dual Image; Figure 4.136 Tools > User Account - Advantech EKI-7428 Series User Manual

4.11.4 Dual Image
The Dual Image page allows you to setup an active and backup partitions for
firmware image redundancy.
To access this page, click Tools > Dual Image.
The following figures represent multiple supported devices. Some interface screens
may represent specific device models.
The following table describes the items in the previous figure.
Item
Active Image
Save
The ensuing table for Image Information 0/1 settings are informational only: Flash
Partition, Image Name, Image Size and Created Time.
4.11.5 Save Configuration
To access this page, click Tools > Save Configuration.
Click Save Configuration to FLASH to have configuration changes you have made
to be saved across a system reboot. All changes submitted since the previous save
or system reboot will be retained by the switch.
4.11.6 User Account
The User Account page allows you to setup a user and the related parameters.
To access this page, click Tools > User Account.
The following table describes the items in the previous figure.
Item
User Name
EKI-7428 Series User Manual
Figure 4.135 Tools > Dual Image
Description
Click the format for the image type: EKI-7428G-4CI-AE-1-01-01.hex
(Active) or EKI-7428G-4CI-AE-1-00-97.hex (Backup).
Click Save to save and keep the new settings.
Figure 4.136 Tools > User Account
Description
Enter the name of the new user entry.
122