Az Eee; Figure 4.29 L2 Switching > Garp > Gmrp Settings; Figure 4.30 L2 Switching > 802.3Az Eee - Advantech EKI-7428 Series User Manual

The following table describes the items in the previous figure.
Item
Status
Apply
The ensuing table for GVRP Information settings are informational only: GVRP.
4.5.6.3 GMRP Settings
To access this page, click L2 Switching > GARP > GMRP Settings.
The following table describes the items in the previous figure.
Item
State
Apply
The ensuing table for GMRP Information settings are informational only: GMRP.
The ensuing table for Multicast Groups settings are informational only: VLAN ID,
MAC Address, Type and Member Ports.
4.5.7

802.3az EEE

The 802.3az Energy Efficient Ethernet (EEE) innovative green feature reduces
energy consumption through intelligent functionality:

Traffic detection — Energy Efficient Ethernet (EEE) compliance

Inactive link detection
Inactive link detection function automatically reduces power usage when inactive
links or devices are detected.
To access this page, click L2 Switching > 802.3az EEE.
The following table describes the items in the previous figure.
Item
Port Select
State
Apply
Description
Click to enable or disable the GARP VLAN Registration Protocol
administrative mode for the switch. The factory default is Disable.
Click Apply to save the values and update the screen.
Figure 4.29 L2 Switching > GARP > GMRP Settings
Description
Click Apply to save the values and update the screen.
Figure 4.30 L2 Switching > 802.3az EEE
Description
Enter the port to setup the EEE function.
Click Enabled or Disabled to set the state mode of the port select
setting.
Click Apply to save the values and update the screen.
51 EKI-7428 Series User Manual