Kontron COMe-bID7 User Manual page 77

Sub-Screen Second Level
Sub-screen
Legacy Console
Redirection
Settings
Serial Port for
Out-of-Band
Management/W
indows
Emergency
Management
Services (EMS) -
Console
Redirection EMS
Console
Redirection
Settings
www.kontron.com
Further Sub-Screens/Description
Flow Control
VT-UTF8 Combo Key Sup
Recorder Mode
Resolution 100x31
Legacy OS Redirecton
Resolution
Putty Keypad
Legacy Serial Selects a COM port to display redirection of
Redirection Port legacy OS and legacy OPROM messages
[COM0, COM1]
Resolution [80x24, 80x25]
[Always enable, Bootloader]
Redirection after
POST
Console redirection EMS
[Enabled, Disabled]
The settings specify how the host computer and the remote
computer (which the user is using) will exchange data. Both
computers should have the same or compatible settings.
Out-of-Band Microsoft Windows Emergency Management
Mgmt Port Services (EMS) allows for remote
management of a Windows Server OS
through a serial port.
COMe-bID7 User Guide Rev. 1.2
Flow control can prevent data
loss from buffer overflow. When
sending data, if the receiving
buffers are full, a 'stop' signal
can be sent to stop the data flow.
Once the buffers are empty, a
'start' signal can be sent to re-
start the flow. Hardware flow
control uses two wires to send
start/stop signals.
[None, hardware RTS/CTS]
Enables VT-UTF8 combination
key support for ANSI/VT100
terminals
[Enabled, Disabled]
If enabled, only text will be sent.
This is to capture terminal data.
[Enabled, Disabled]
Enables or disables extended
terminal resolution.
[Enabled, Disabled]
On legacy OS, the number of row
and columns supported
redirection
[80x24, 80x25]
Select function key and key pad
on putty.
[VT100, LINUX, XTERMR6, SCO,
ESCN, VT400]
// 77