Kontron COMe-bID7 User Manual page 79

Sub-Screen Second Level
Sub-screen
Read only field
WARNING: Disabling SIO Logical Devices may have unwanted side effects.
PROCEED WITH CAUTION.
Option ROM Restore if
Dispatch Policy Failure
Primary Video
Ignore
On Board
Network
Controller Slot
#x
PCI Subsystem Read only field
Settings
PCI Bus Driver version
PCI Latency
Timer
PCI-X Latency
Timer
VGA Palette
Snoop
PERR#
Generation
SERR#
Generation
Above 4G
Decoding
SR-IOV Support
BME DMA
Mitigation
PCI Express
Settings
www.kontron.com
Further Sub-Screens/Description
[Use Automatic Settings]
[Enabled, Disabled]
[Enabled, Disabled]
[Enabled, Disabled]
[Enabled, Disabled]
Displays value to be programmed into the PCI latency timer
register
[32, 64, 96, 128, 160, 192, 224, 248]
Displays value to be programmed into the PCI latency timer
register
[32, 64, 96, 128, 160, 192, 224, 248]
Enables or disables VGA palette register snooping
[Enabled, Disabled]
Enables or disables PCI device to generate PERR#
[Enabled, Disabled]
Enables or disables PCI device to generate SERR#
[Enabled, Disabled]
Enables or disables decoding in Address Space above '4G' for
64 bit capable devices. Note: Only if system supports 64 bit PCI
decoding.
[Enabled, Disabled]
Enables or disables single root IO virtualization support If the
system has SR-IOV capable PCIe devices.
[Enabled, Disabled]
[Enabled, Disabled]
Relaxed ordering
Enables or disables PCI express device
relaxed ordering
[Enabled, Disabled]
Extended Tag If enabled the device is allowed to use 8-bit
tag field as a requester.
[Enabled, Disabled]
No Snoop Enables or disables PCI express device No
Snoop option.
[Enabled, Disabled]
Maximum Sets maximum payload of PCI Express
Payload device or allows System BIOS to select the
value automatically.
COMe-bID7 User Guide Rev. 1.2
// 79